Duct Hygrostat functions as a two-level controller to regulate the relative air humidity in climate ducts and test chambers for climate control. It is capable of controlling air humidifiers or dehumidifiers and can be applied in various settings such as storage rooms, cold storage rooms, and greenhouses.
Specification
Part number: 1.0509.60.001
Hysteresis: +/-4% h. rel.
Material: Plastic
Accuracy: +/-4% h. rel.
Type of protection: IP 64
Operating range: 35 ... 95% rel . h .
Type of contact: 1 x switch over (micro switch)
Micro switch
- Switch difference: approx . 4% rel . h .
- Switch capacity with ohmic load: 15 A @ 230 V
- Switch capacity with inductive load: 2 A @ 230 V
- Switch capacity with D/C voltage: 0.25 A DC @ 230 V
- Max . voltage: 250 V AC
- Switch capacity, minimum load: 100 mA, 125 V AC
Operating temperature: 0 ... +60 °C
Dimensions: 80x120x72
Accessories
Mounting Flange
Part number: 1.0509.81.000
Serves for mounting the duct hygrostat 1 .0506 .60 .001 . The flange clamps the hygrostat to the stem, and allows, thus, an alternative mounting variant to the direct installation of the hygrostat housing at a duct wall.
Protective Gauze
Part number: 500278
The protective gauze is placed on the sensor tube of the duct hygrostat 1 .0509 .60 .001, and protects, thus, the measuring element against coarse dust particles.
Windscreen
Part number: 1.0509.85.002
Consisting of and dust shield. Both are placed on the sensor tube of the duct hygrostat 1.0509.60.001 and, thus, are protecting the measuring element against coarse dust particle, and faulty measurements with airflows > 3 m/s.