Direct action solenoid valve for liquid gaseous in Dubai UAE

If you need to control the flow of liquid or gas, whether it is in automatic or on / off mode, you need a solenoid valve. It can be said that in both light and clear conditions, you need a solenoid valve, so it is needed to control the flow of water and gas. The application of this solenoid valve is to open or close a circuit, dosing products, mixing gases or liquids. This type of valve does not require a pressure difference between inlet and outlet to work. So they can operate from 0 times up. These valves are installed in the equipment so that the equipment can be used safely and efficiently. What a solenoid valve does is use a piston to open or close the valve, or allow it to pass through, or seal it without any leaks Marine Land company had the best for you.

What is the main function of a solenoid valve?

Solenoid valves are often used to turn off, release, dose, distribute or mix fluids (liquids and gases).

The solenoid valves control the flow of fluid and when they receive energy, the valve moves to another position.

They are often used in surveillance systems. Such as pilot gas alarms to cut off the gas source in case of leak detection.

Due to its structure and type, the solenoid valve is easy to control internal leakage until it reaches zero.

Therefore, it is very safe to use solenoid valves that can be suitable for corrosive, toxic environments or high and low temperatures.

Where are solenoid valves commonly used?

These valves are smaller in size and are commonly used in low-flow or high-pressure applications.

The most common example of a solenoid valve is in a car ignition system. A solenoid valve is used to start the starter motor, which turns on the motor.

Because they are widely used to control fluid flow, they are often used in household appliances such as washing machines.

Direct solenoid valves.

Direct solenoid valves follow the principles of simple operation and do not use a diaphragm, because their seal is part of the moving core and remains closed even if no pressure is applied.

This is in contrast to the pilot valve, which requires some pressure to keep the valve closed. The main components of a two-way reciprocating valve with a direct function such as type 6013 are a coil, a closed spring, a valve body cover, and a valve body with a seat.

With a normally operated direct-acting solenoid valve, the outlet port is blocked when no current enters the coil because the spring closing the piston presses on the valve seat.

It then creates a current through the coil that pulls the piston and seals against the force of the spring and pulls the circumference upwards.

As a result, the channel opens to allow the environment to flow through the direct valve.

Advantages of direct solenoid valve:

• Suitable for negative pressure circuits
• Available in very affordable compact sizes
• Versions 2/2 and 2/2 are normally open, usually closed, mixer or dilator
• Available versions for very high pressures

Two-way reciprocating valves with cost-effective direct effects are used in global applications for clean and neutral liquids, gases, and vapors.

Prescriptions with high-quality special materials can also be used in mildly acidic and alkaline solutions. Therefore, they can be used for a wide range of applications such as shutdown, dosing, filling, and ventilation.

Due to the spring sealing of the seat, these types of valves have a long life, and the switching cycle and service life have been increased due to the sliding ring bearings.